| Services Available | |
|---|---|
| Repair | No |
| Free Support | Yes |
Overview
The SC-CPI adds CPI bus functionality to your CR800, CR850, CR1000, and CR3000 dataloggers, which is necessary for them to connect to the CDM (Campbell Distributed Module) devices and other CPI-enabled sensors. The SC-CPI connects to the data logger using the C1, C2, and C3 ports.
The SC-CPI is not required for, or supported by, data loggers with a native CPI interface. Campbell Scientific strongly recommends that CDMs be connected to data loggers with a native CPI interface, such as the CR6.
Benefits and Features
- Enables a CR800, CR850 CR1000, or CR3000 to be part of a CPI/CDM network
- Provides detailed CPI communication diagnostics
- Supports monitoring of the serial or CPI load
- Indicates if CPI frame errors occur
- Provides information about each CPI module that it detects in its network
Images
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| CR1000 (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
Data Logger Considerations
A 5-conductor cable connects the data logger to the SC-CPI, and an Ethernet cable connects the SC-CPI to the CDM.
The data logger operating system must be version OS 26.
Specifications
| Temperature Range |
|
| Current Drain | 50 mA (active) |
| Dimensions | 15.94 x 7.49 x 3.18 cm (6.28 x 2.95 x 1.25 in.) including ground lug |
| Weight | 0.188 kg (0.415 lb) |
Connectors |
|
| CPI | RJ45 |
| Serial Connect to Data Logger | Screw terminal |
| Computer Configuration via Device Configuration Utility | USB |
Documents
Downloads
If a download of the full version of purchased software is needed, use the same account made for the purchase and navigate to the account's Purchased Software section.
SC-CPI OS v.04 (477 KB) 10-10-2016
Execution of this download installs the SC-CPI Operating System on your computer for upload to the SC-CPI device with Device Configuration Utility.
Note: The SC-CPI OS V.02 or greater is required to use the CDM-VW300/305 with the CR3000/1000/800 datalogger that is using OS 28 or higher. The CDM-VW300/305 Operating System will also need to be upgraded to CDM-VW300/305 OS V.02. If using a CR3000/1000/800 datalogger with an older OS, an operating system upgrade to the datalogger will be required.
Frequently Asked Questions
Number of FAQs related to SC-CPI: 2
-
To communicate with CDM devices using the CPI protocol, the CR3000, CR1000, CR850, and CR800 dataloggers require an SC-CPI device. Only one SC-CPI device per data logger is required. It is expected that the design of future Campbell Scientific data logger products will work with CPI-based modules directly.
-
The communications protocol used by CDM devices is the CAN Peripheral Interface (CPI), which includes methods that are proprietary to Campbell Scientific.
Articles and Press Releases
Blog Articles
-
Integrated Peripherals: Expansion made easy
11-29-2017 Author: Timothy Jeppsen
Listed Under
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences