FAQs Häufige Fragen an uns

Fragen dazu Fragen dazu

All FAQs (1757 total: showing 581-600)

Can the A100LK-L be ordered without a cable?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS1K modules?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS120 modules?
How many strain gages can be hooked up per excitation channel using a CR1000 and multiple 4WFBS350 modules?
Can more than one strain gage use the same excitation terminal?
What needs to be remembered when trying to excite multiple strain gages from the same excitation channel?
What is necessary for making strain gage measurements with Campbell Scientific dataloggers?
What is used to wire an AVW200-series module to the control ports on the CR3000, CR1000, or CR800?
Can a CR3000, CR1000, or CR800 communicate with an AVW200-series module via an RS-232 port?
How fast can the AVW200, AVW206, AVW211, or AVW216 make a measurement?
How many AM16/32B multiplexers can be attached to one AVW200-series module?
What might cause an AVW200-series module to not communicate with a datalogger?
In a wireless network, can the radio of an AVW206, AVW211, or AVW216 translate data from other AVW200-series modules?
How many AVW200-series modules can communicate with a CR1000?
Is there a way to request and obtain the voltage and radio signal strength from a remotely located AVW206 using CRBasic?
How strong is the signal of the built-in radio on the AVW206, AVW211, and AVW216?
Is an AVW200-series module required on vibrating wire transducers to limit noise?
Is there a reset button on the AVW200, AVW206, AVW211, or AVW216?
What are the differences between the AVW200, AVW206, AVW211, and the AVW216?
Is a 17394 connected to an SC32B basically the same as an SC-USB?

Vorhergehendes Nächstes