Toggle navigation
Produkte
Solutions
Unterstützung
Firmenprofil
Home
Produkte
Solutions
Unterstützung
Firmenprofil
Angebotsliste
Kontakt
Länderspezifische Webseiten
Länderspezifische Webseiten
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
Verzeichnis der Länder
Log In
FAQs
Häufige Fragen an uns
Fragen dazu
Fragen dazu
Suchen
All FAQs
(1757 total: showing 1701-1720)
The WindSonic has the average 1 Hz output of 40 Hz block measurements. What does the 40 Hz block measurement mean?
Is it possible to connect a sonic anemometer and an electronic compass to a smart datalogger to give wind speed and direction on a non-fixed platform?
If data is downloaded to a PC, the resultant “CR1000_Table1.dat” file is, for example, 150 kB in size. Is 150 kB necessarily its size on the CR1000? Is there any type of data compression being used?
Can the CR1000 or CR3000 communicate over TCP/IP?
Can the CR1000 measure 4 to 20 mA signals?
What is the power consumption (mA) of the 05103-L, 05103-45-L, 05305-L, and 05106-L anemometers?
What is the procedure for orienting a WindSonic-L to the cardinal directions, so that the wind direction readings are correct?
Can the CR5000 store data with a rate of 1000 Hz?
Is the 03101-L capable of delivering a 0 to 5 Vdc square wave output for the wind speed?
Do heater resistance values of 37 to 48 ohm indicate a problem with the 229-L, or are those values within the normal range?
Is there a limit to how much memory the CR5000 can access/use through the PCMCIA interface?
Is it possible to transfer data from PC400 directly to a database such as Oracle (possibly through ODBC on Windows)?
What might cause the 014A-L to miss data, provide readings of 0 constant wind speed, and show various readings of gust speed?
Is the CC640 a real-time camera?
How many data lines can a SM192 and a SM4M store using a simple program?
How high above the ground should a net radiometer be placed?
How many solar panels can be connected to a CH100 regulator? Can one 60 W solar panel and two 20 W solar panels be connected to the same regulator?
What is the pin connection between USB and DB9 (RS-232) connectors?
If an existing wind set is replaced with a wind monitor (05103-L, 05103-45-L, 05106-L, 05305-L), will more than the multiplier and offset have to be changed in the datalogger program?
How can the 229-L be calibrated?
Vorhergehendes
Nächstes